Defensor PH28A Provozní pokyny stáhnout pdf (Strana 35)

Theoperatingvoltageisspeciedonthetypeplatelocatedinsidetheunit.

DANGER!

Neverusefusesthatdonotmatchtheabovespecicationsanddonotbypassblownfusesas

this could rise danger to persons or material assets

6. Reinstallthefuseholder,thepresstheholderdownuntilitproperlyengages.

7. Mount the terminal cover and tighten both mounting screws.

8. Insert and lock the water tank carriage (see chapter 5.1).

9. Reconnect the unit to the mains.

Replacing the ionizer electrodes

1. ShutdowntheDefensorPH28anddisconnecttheunitfromthemains(pullthemainsplugout

ofthesocket).

2. Remove the water tank carriage (see chapter 5.1) and tip the swivel plate up.

3. Replacetheionizerelectrodesaccordingtotheoppositegure.

4. Tip the swivel plate down.

5. Insert and lock the water tank carriage (see chapter 5.1).

6. Reconnect the unit to the mains.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 47 48

Žádné komentáře

Modèles	Type de document
NXD-1200V	Manuel de l'utilisateur Installation Guide - NXT/NXD-1200V 12" Modero Video - AV-iQ, 2 pages
NXD-1700VG	Manuel de l'utilisateur AMX NXT-1700VG RGB VG Series Table Top Touch Panel, 2 pages
NXD-CV5	Manuel de l'utilisateur Modero CV5 Quick Start Guide, 2 pages
NXP-TPI/4	Manuel de l'utilisateur NXP-TPi4.QuickStartGuide.93-2275.Rev G.fm, 2 pages

Defensor PH28A Provozní pokyny Strana 35